liske1 2017-01-28 09:23:24
Hi
fenix_peregrino 2017-01-28 09:23:26
ducasse: yes is connected
ikonia 2017-01-28 09:23:42
Pyro3d: so on the VM is the route back to the host IP a.) set b.) set on the right interface
junke1990 2017-01-28 09:24:03
ducasse: i don't see the option to convert it
ducasse 2017-01-28 09:24:31
fenix_peregrino: just partition and format it with gparted, then set it to automount with the gnome disk util.
Pyro3d 2017-01-28 09:24:40
ikonia: the route back to the subnet the host belongs to is present and on the correct interface
junke1990 2017-01-28 09:24:41
ducasse: would that simply be fixed by writing to the disk?
ikonia 2017-01-28 09:24:58
Pyro3d: so what happens if the VM pings the host
ducasse 2017-01-28 09:24:58
junke1990: when starting gdisk it should say that's what it's going to do.
liske1 2017-01-28 09:25:07
How I can use firewalld in ansible in Ubuntu ? Beacause when I install this on server (sudo apt-get install firewalld), then ansible return mi error - "firewalld and its python 2 module are required for this module"
ikonia 2017-01-28 09:25:20
liske1: ubuntu doesn't use firewalld by default
junke1990 2017-01-28 09:25:29
ducasse: yes but at the point where I want to write it to the disk it says "About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!"
ikonia 2017-01-28 09:25:31
liske1: I don't think it's integrated into systemd either in ubuntu
junke1990 2017-01-28 09:25:43
ducasse: this scares me...
Pyro3d 2017-01-28 09:25:45
ikonia: I see icmp replys from the host back on the interface, but the vm isn't recognizing them.
ikonia 2017-01-28 09:26:02
Pyro3d: the vm isn't recognizing them ?
ikonia 2017-01-28 09:26:08
Pyro3d: does the vm interface see them
Pyro3d 2017-01-28 09:26:12
ikonia: That's my best guess. And yes.
liske1 2017-01-28 09:26:27
ikonia: I install this and when I show systemctl status firewalld then return: Active
ducasse 2017-01-28 09:26:39
junke1990: i can't remember if i got that, sorry. i wouldn't risk it, as i've already said a dozen times.
ikonia 2017-01-28 09:26:40
liske1: right, thats just s systemd unit
fenix_peregrino 2017-01-28 09:26:41
ducasse: the thins ithat i did that and didnt work. Probably I did it on an incorrect manner
fenix_peregrino 2017-01-28 09:26:55
ducasse: what are the steps?
ikonia 2017-01-28 09:27:03
Pyro3d: Hmmmm, let me have a think for a moment,
liske1 2017-01-28 09:27:08
ikonia: thanks :)
junke1990 2017-01-28 09:27:13
ducasse: thanks, I'm going to make a backup and wait for that to finish
fenix_peregrino 2017-01-28 09:28:19
ducasse: I cant write anything on the disk. I cant create folders, paste files etc
ducasse 2017-01-28 09:28:30
fenix_peregrino: select the disk, make partition(s), format it/them as ext4 (for use with linux)
ducasse 2017-01-28 09:28:47
fenix_peregrino: run gparted with gksudo
Tahr-Poop 2017-01-28 09:30:32
junke1990, backup partition table before converting it: sfdisk -d /dev/sdX > backup.txt
junke1990 2017-01-28 09:31:10
Thar-Poop: would that mean that If it fails I can put back the dos table?
ducasse 2017-01-28 09:31:13
junke1990: i'm pretty sure mine just said "converting mbr to gpt, write gpt with protective mbr (y/n)?", but i don't know what the difference was from your scenario.
fenix_peregrino 2017-01-28 09:31:22
ducasse: it says that im not the owner :( How can I fix this?
junke1990 2017-01-28 09:32:00
I'm reading online that I have to have a 1 mb room before and after the partition
Tahr-Poop 2017-01-28 09:32:26
junke1990, yep http://www.rodsbooks.com/gdisk/mbr2gpt.html < read this before doing anything
ducasse 2017-01-28 09:32:42
fenix_peregrino: what says you're not the owner? when doing what? 'it' is not very specific.
fenix_peregrino 2017-01-28 09:33:34
ducasse: it says that im not the owner so I cannot change the permissions
fenix_peregrino 2017-01-28 09:33:46
ducasse: it doesnt let me write anything on the disk :(
ioria 2017-01-28 09:33:54
fenix_peregrino, ls -l /media/$USER
ducasse 2017-01-28 09:34:08
fenix_peregrino: what is 'it'?
ikonia 2017-01-28 09:34:08
Pyro3d: on the vm - does the host appear in the arp table ?
Pyro3d 2017-01-28 09:34:21
ikonia: Yep. arp is fine
ikonia 2017-01-28 09:34:33
and vice-a-versa ?
fenix_peregrino 2017-01-28 09:34:44
ducasse: it says
fenix_peregrino 2017-01-28 09:34:48
ducasse: drwx------ 3 user user 4096 ene 28 17:30 HDD
fenix_peregrino 2017-01-28 09:35:01
ducasse: also says "total 4"
Pyro3d 2017-01-28 09:35:30
ikonia: Yeah. I also checked for mac conflicts on the interfaces, as I encounted the same issue with a pair of juniper srx chassis cluster last week, but I didn't see any interfaces that had the same macs.
ikonia 2017-01-28 09:35:48
Pyro3d: well you sholdn't as there is only the host and the vm in play here
ioria 2017-01-28 09:35:58
fenix_peregrino, can you paste sudo parted -l ?
Pyro3d 2017-01-28 09:36:13
ikonia: Yeah, but I didn't think I should've with the srxs as well.
ikonia 2017-01-28 09:36:44
Pyro3d: the host can't allocate the same mac to a vm
fenix_peregrino 2017-01-28 09:36:54
ducasse: it says http://pastebin.com/teELGmBg
Pyro3d 2017-01-28 09:37:29
ikonia: It didn't so that's good.
ioria 2017-01-28 09:38:09
fenix_peregrino, sudo parted -l | nc termbin.com 9999
jdm 2017-01-28 09:38:16
?
ikonia 2017-01-28 09:38:46
Pyro3d: in the VM when the ping goes out do you see the ACK ?
ikonia 2017-01-28 09:38:51
or do you just see the packet response
fenix_peregrino 2017-01-28 09:39:14
ioria: http://termbin.com/qo7l
rifter 2017-01-28 09:39:31
ok, so, now I have a question for myself again. I have lubuntu 16.10 and want to install 32 bit libraries on it. The process should be the same on it as for ubuntu. I want to know if one of you knows how to do that or can point me to a resource for the process
Pyro3d 2017-01-28 09:39:32
ikonia: The ack? I see the icmpecho request and the echo reply.
ikonia 2017-01-28 09:40:23
Pyro3d: so from what you're telling me my gut is telling me that for some reason traffic is going out/via the physical interface
fenix_peregrino 2017-01-28 09:40:28
ioria: what is the problem :(?
ikonia 2017-01-28 09:40:50
Pyro3d: that shouldn't matter itself, however depending on how your doing the forwarding (if it's going via the physical interface) you could be getting a mangled reponse
ioria 2017-01-28 09:41:12
fenix_peregrino, so you have two disks: sda for storage i guess (gpt), and sdb (encrypted) for the os ?
fenix_peregrino 2017-01-28 09:41:36
ioria: yes
ioria 2017-01-28 09:41:58
fenix_peregrino, mount | nc termbin.com 9999
fenix_peregrino 2017-01-28 09:42:33
ioria: http://termbin.com/1geq
Pyro3d 2017-01-28 09:43:20
ikonia: Doesn't look like the case. I don't see those packets outbound on the physical interface. I'm going to check with wireshark for damaged frames though.
ioria 2017-01-28 09:43:34
fenix_peregrino, did you edit /etc/fstab ?
ikonia 2017-01-28 09:43:50
Pyro3d: what about inbound ?
fenix_peregrino 2017-01-28 09:44:06
ioria: nop, I just created a partition named hDD nothing more
ikonia 2017-01-28 09:44:13
Pyro3d: that could be the problem, out via a different interface than the response can often make a mangled response
Pyro3d 2017-01-28 09:44:19
ikonia: no icmp from the vm on the physical interface is present when pingning the host